عملکرد توربین پیچ ارشمیدس: مطالعه مروری

نوع مقاله : مقاله مروری

نویسندگان

گروه علوم و مهندسی آب، دانشکده کشاورزی، دانشگاه بوعلی سینا، همدان، ایران.

10.22059/jwim.2023.363842.1094

چکیده

با توجه به نیاز روزافزون بشر به انرژی برق و کاهش منابع تجدیدناپذیر برای تولید آن، استفاده از منابع غیرفسیلی و تجدیدپذیر و منابعی که خسارت­های زیست­محیطی کم‌تری را داشته باشند، موردتوجه قرار گرفته است. توربین پیچ ارشمیدس به‌عنوان یک وسیله تولید انرژی پاک در مجاری آبی مورداستفاده قرار گرفته و مطالعات عددی و آزمایشگاهی زیادی بر روی آن صورت پذیرفته است. بیش‌تر این مطالعات، در زمینه بهینه‌سازی اجزای تشکیل­دهنده پیچ و تأثیر آن‌ها بر راندمان آن می‌باشد و شامل طول، قطر داخلی و خارجی، زاویه استقرار، تعداد پره­ها و گام پیچ است. در این پژوهش، مهم‌ترین مطالعات انجام‌گرفته در زمینه توربین پیچ ارشمیدس که در دو دهه اخیر چاپ شده است، مرور می­شود. نتایج نشان می­دهد که پارامترهای تشکیل‌دهنده اجزای پیچ تأثیر بیش‌تری بر روی راندمان، در مقایسه با پارامترهای هیدرولیکی دارد.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

Archimedes Screw Turbine Performance: a review

نویسندگان [English]

  • abbass godini
  • Kazem Shahverdi
  • Saied Gohari
Department of Water Science and Engineering, Faculty of Agriculture, Bu-Ali Sina University, Hamedan, Iran.
چکیده [English]

Due to the increasing human need for electrical energy and the reduction of non-renewable resources for its production, the use of non-fossil and renewable resources and resources that have less environmental damage have been taken into consideration. Archimedes screw turbine is used as a means of producing clean energy in waterways, and many theoretical and experimental studies have been done on it. Most of these studies, in laboratory and numerical form, are in the field of optimization of screw constituent components and their effect on its efficiency including length, inner and outer diameter, installation angle, number of blades and screw pitch. In this research, the most important studies conducted in the field of Archimedes screw turbine performance, which have been published in the last two decades, were reviewed. The results showed that the parameters of screw components have a greater effect on efficiency compared to hydraulic parameters.

کلیدواژه‌ها [English]

  • Archimedes screw
  • Energy
  • small-scale
  • water
  1. Abdullah, O. S., Kamel, A. H., & Khalil, W. H. (2021). Numerical and experimental modelling of small hydropower turbine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 80(1), 112-127.
  2. Alonso-Martinez, M., Suárez Sierra, J. L., Coz Díaz, J. J. d., & Martinez-Martinez, J. E. (2020). A New Methodology to Design Sustainable Archimedean Screw Turbines as Green Energy Generators. International Journal of Environmental Research and Public Health, 17(24), 9236.
  3. Bouvant, M., Betancour, J., Velásquez, L., Rubio-Clemente, A., & Chica, E. (2021). Design optimization of an Archimedes screw turbine for hydrokinetic applications using the response surface methodology. Renewable Energy, 172, 941-954.
  4. Dedić-Jandrek, H., & Nižetić, S. (2019). Small scale archimedes hydro power plant test station: Design and experimental investigation. Journal of Cleaner Production, 231, 756-771.
  5. Dellinger, G., Garambois, P.-A., Dellinger, N., Dufresne, M., Terfous, A., Vazquez, J., & Ghenaim, A. (2018). Computational fluid dynamics modeling for the design of Archimedes Screw Generator. Renewable Energy, 118, 847-857.
  6. Dellinger, G., Simmons, S., Lubitz, W. D., Garambois, P.-A., & Dellinger, N. (2019). Effect of slope and number of blades on Archimedes screw generator power output. Renewable Energy, 136, 896-908.
  7. Dellinger, G., Terfous, A., Garambois, P.-A., & Ghenaim, A. (2016). Experimental investigation and performance analysis of Archimedes screw generator. Journal of Hydraulic Research, 54(2), 197-209.
  8. Edirisinghe, D. S., Yang, H.-S., Kim, M.-S., Kim, B.-H., Gunawardane, S. P., & Lee, Y.-H. (2021). Computational Flow Analysis on a Real Scale Run-of-River Archimedes Screw Turbine with a High Incline Angle. Energies, 14(11), 3307.
  9. Erinofiardi, E., Koirala, R., & Shiwakoti, N. (2022). Sustainable Power Generation Using Archimedean Screw Turbine: Influence of Blade Number on Flow and Performance. Sustainability, 14(23), 15948.
  10. Kozyn, A., & Lubitz, W. D. (2017). A power loss model for Archimedes screw generators. Renewable Energy, 108, 260-273.
  11. Lee, M. D., & San Lee, P. (2021). Modelling the energy extraction from low-velocity stream water by small scale Archimedes screw turbine. Journal of King Saud University-Engineering Sciences.
  12. Lubitz, W. D., Lyons, M., & Simmons, S. (2014). Performance model of archimedes screw hydro turbines with variable fill level. Journal of Hydraulic Engineering, 140(10), 04014050.
  13. Maulana, M. I., Syuhada, A., & Kurniawan, R. (2019). Experimental study on the effect of flow rate on the performance of two-blade archimedes screw turbine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61(1), 10-19.
  14. Maulana, M. I., Syuhada, A., & Nawawi, M. (2018). Blade number impact on pressure and performance of archimedes screw turbine using CFD. AIP Conference Proceedings,
  15. Rohmer, J., Knittel, D., Sturtzer, G., Flieller, D., & Renaud, J. (2016). Modeling and experimental results of an Archimedes screw turbine. Renewable Energy, 94, 136-146.
  16. Saroinsong, T., Soenoko, R., Wahyudi, S., & Sasongko, M. N. (2016). Effect of Froude Number on Three-Bladed Archimedes Screw Turbine Efficiency. International Journal of Renewable Energy Research, 6(3), 1153-1158.
  17. Saroinsong, T., Thomas, A., & Mekel, A. N. (2018). Performance Of Three-Bladed Archimedes Screw Turbine Using Response Surface Methodology. International Conference on Applied Science and Technology (iCAST),
  18. Scott Simmons1, M. L., & William Lubitz. (2019). Effects of varying inclination angle on Archimedes screw generator power production with constant head, Journal of Hydraulic Engineering, 147(3), 04021001.
  19. Shahverdi, K. (2021). Modeling for prediction of design parameters for micro-hydro Archimedean screw turbines. Sustainable Energy Technologies and Assessments, 47, 101554.
  20. Shahverdi, K., Loni, R., Ghobadian, B., Gohari, S., Marofi, S., & Bellos, E. (2020). Numerical Optimization Study of Archimedes Screw Turbine (AST): A case study. Renewable Energy, 145, 2130-2143.
  21. Shahverdi, K., Loni, R., Ghobadian, B., Monem, M., Gohari, S., Marofi, S., & Najafi, G. (2019). Energy harvesting using solar ORC system and Archimedes Screw Turbine (AST) combination with different refrigerant working fluids. Energy Conversion and Management, 187, 205-220.
  22. Shahverdi, K., Loni, R., Maestre, J., & Najafi, G. (2021). CFD numerical simulation of Archimedes screw turbine with power output analysis. Ocean Engineering, 231, 108718.
  23. Shahverdi, K., Najafi, G., Mamat, R., Ghazali, M. F., EI-Shafy, A., & Mousa, M. (2023). Introducing a design procedure for Archimedes Screw Turbine based on optimization algorithm. Energy for Sustainable Development, 72, 162-172.
  24. Shimomura, M., & Takano, M. (2013). Modeling and performance analysis of Archimedes screw hydro turbine using moving particle semi-implicit method. Journal of Computational Science and Technology, 7(2), 338-353.
  25. Simmons, S., Dellinger, G., Lyons, M., Terfous, A., Ghenaim, A., & Lubitz, W. D. (2021). Effects of Inclination Angle on Archimedes Screw Generator Power Production with Constant Head. Journal of Hydraulic Engineering, 147(3), 04021001.
  26. Siswantara, A. I., Harmadi, R., & Adanta, D. (2019). Investigation of the α angle’s effect on the performance of an Archimedes turbine. Energy Procedia, 156, 458-462.
  27. Straalsund, J. L., Harding, S. F., Nuernbergk, D. M., & Rorres, C. (2018). Experimental evaluation of advanced Archimedes hydrodynamic screw geometries. Journal of Hydraulic Engineering, 144(8), 04018052.
  28. Suraya, A. N., Ammar, N., & Kulthum, J. U. (2015). The effect of substantive parameters on the efficiency of Archimedes screw microhydro power: a review. IOP Conference Series: Materials Science and Engineering,
  29. Zitti, G., Fattore, F., Brunori, A., Brunori, B., & Brocchini, M. (2020). Efficiency evaluation of a ductless Archimedes turbine: Laboratory experiments and numerical simulations. Renewable Energy, 146, 867-879.