Evaluation of furrow irrigation for different inflow hydrographs

Document Type : Research Paper

Authors

1 Ph.D Student, Department of Water Engineering Shahid Bahonar University of Kerman, Iran

2 Associated Professor, Department of Water Engineering, Shahid Bahonar University of Kerman, Iran

3 Assistant Professor, Department of Water Engineering, Shahid Bahonar University of Kerman, Iran

Abstract

Furrow irrigation is the most common type of surface irrigation. Determine the advance and recession time in the field is required the accurate measurement and this can be costly and time consuming. WinSRFR model is used for simulation furrow irrigation by zero inertia and kinematic wave engines. Using this model, advance time, reaction time, infiltration depth, runoff depth and application efficiency are calculated and compared with field data. Also, different inflow hydrograph shapes such as steady, incremental, cut back and hydrograph has been investigated in the research field in Shahid Bahonar University of Kerman. Based on the results, the kinematic wave model, Because of assuming the uniform flow through the furrow's length, has lower precision than zero inertia engine. The results showed that when an inflow hydrograph shape has smooth changes, the precision is increased. The model has the highest accuracy in calculation of advance time (1.2%) in steady inflow hydrograph and lowest accuracy in calculation of advance time (11.2%) in incremental inflow hydrograph. The highest application efficiency and the lowest runoff are accrued in cutback inflow hydrograph with 72 and 28%, respectively.

Keywords


1-     بهبهانیم. ر.، بابازاده ح (1384) ارزیابی مزرعه‌ای مدل سیستم آبیاری سطحی Sirmod. علوم کشاورزی و منابع طبیعی. (2)12: 10-1.
2-   تقی‌زاده ز.، وردی‌نژاد و.ر.، ابراهیمیان ح. و خان‌محمدی ن (1391) ارزیابی مزرعه‌ای و تحلیل سیستم آبیاری سطحی با WinSRFR (مطالعه موردی آبیاری جویچه‌ای). آب و خاک. (6)26: 1459-1450.
3-       Bautista E, Schlegel J.L and Strelkoff T.S (2012) WinSRFR 4.1 User manual. Arid land agricultural research center.
4-       Bautista E, Strelkoff T.S, Clemmens A.J and Schlegel, J.L (2010) WinSRFR: Current advances in software for surface irrigation simulation and analysis. 5th National Decennial Irrigation Conference. American Society of Agricultural and Biological Engineers and the Irrigation Association Phoenix Convention Center.
5-       Clark B, Hall L, Davids, Walker W and Eckhardt J (2009) Application of Sirmod to evaluate potential tailwater reduction from improved irrigation management. World Environmental and Water Resources Congress, American Society of Civil Engineers.
6-       Ebrahimian H and Laighat A (2011) Field evaluation of various mathematical models for furrow and border irrigation systems. Soil and Water Research. (2):91-101.
7-       Esfandiari M and Maheshvari B.L (2001) Field evaluation of surface irrigation models. Agricultural Engineering Research. 79(4):459-479.
8-       Gonzáleza C, Cerveraa L and Moret-Fernándezb D (2011) Basin irrigation design with longitudinal slope. Agricultural Water Management. 98:1516– 1522.
9-       Manning Ch.R (1993). Infiltration parameters for mathematical models of furrow irrigation. A Thesis for the Degree of Master of Science in the Graduate College, the University of Arisona.
10-   Rodriguez J.A and Martos J.C (2008) SIPAR_ID User Guide. Bergantín, España.
11-   Soroush F, Fentonb J.D, Mostafazadeh-Farda B, Mousavia S.F and Abbasi F (2013) Simulation of furrow irrigation using the Slow-change/slow-flow equation. Agricultural Water Management. 116:160– 174.
12-   Walker W. R and Skogerboe G. V (1987) Surface irrigation theory and practice.  Prentice Hall College. 524 pages.
13-   Walker W.R and Humpherys A.S (1983) Kinematic-wave furrow irrigation model. Irrigation and Drainage Engineering. 109 (4), 377–392.
14-   Warnock A, Kim J, Ivanov V and Katopodes N.D (2014) Self-Adaptive Kinematic-Dynamic Model for Overland Flow. Irrigation and Drainage Engineering. 140(2):169-181.