ساخت، آزمون و ارزیابی توربین پیچ هیدرودینامیک در مقیاس آزمایشگاهی

نوع مقاله : مقاله پژوهشی

نویسندگان

گروه علوم و مهندسی آب، دانشکده کشاورزی، دانشگاه بوعلی سینا، همدان، ایران.

10.22059/jwim.2024.374166.1154

چکیده

امروزه با توجه به اهمیت روزافزون استفاده از انرژی‌های پاک، توربین پیچ هیدرودینامیک به‌عنوان یک منبع انرژی در مقیاس کوچک موردتوجه قرار گرفته است. یکی از خصوصیاتی که توربین مذکور را نسبت به سایر روش‌های تولید انرژی منحصربه‌فرد کرده است، عملکرد قابل‌قبول آن در شرایط ارتفاع و دبی پایین است. اگرچه پژوهش‌های زیادی در دنیا جهت رسیدن به بهترین ساختار توربین با راندمان خروجی حداکثر، با استفاده از روش‌های عددی و آزمایشگاهی انجام شده است، اما به‌روش‌های ساخت این نوع توربین‌ها کم‌تر پرداخته شده است. در این پژوهش، برای اولین بار در ایران به تشریح ساخت توربین پیچ هیدرودینامیک با یک روش سنتی که مبتنی بر فرایندهای متداول صنعتی می‌باشد، پرداخته شده است. سپس، آزمون و ارزیابی آن موردتوجه قرار گرفته است. با توجه به نتایج این پژوهش، زاویه استقرار 24 درجه به‌عنوان بهترین زاویه استقرار می‌باشد.

کلیدواژه‌ها

موضوعات

عنوان مقاله [English]

Construction, test, and evaluation of hydrodynamic screw turbine in laboratory scale

نویسندگان [English]

  • abbass godini
  • Kazem Shahverdi
  • saeed gohari
Department of Water Science and Engineering, Faculty of Agriculture, Bu-Ali Sina University, Hamedan, Iran.
چکیده [English]

Due to the increasing importance of using clean energy, Hydrodynamic screw turbine has been considered as a small-scale hydropower source. One of the characteristics that makes the mentioned turbine to be unique compared to others is its acceptable performance in low head and flow conditions. Although a lot of research has been done in the world to achieve the best configuration to achieve the maximum output efficiency using numerical and laboratory methods, but the methods of making these types of turbines have rarely been examined. In this research, for the first time in Iran, the construction of a hydrodynamic screw turbine with a traditional method based on common industrial processes has been described. Then, its testing and evaluation have been considered. The installation angle of 24 degrees was obtained as the optimal installation angle.

کلیدواژه‌ها [English]

  • Hydrodynamic Screw Turbine
  • Energy
  • Small-scale
  • Water

مراجع

  1. Abdullah, O. S., Kamel, A. H., & Khalil, W. H. (2021). Numerical and experimental modelling of small hydropower turbine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 80(1), 112-127.
  2. Alonso-Martinez, M., Suárez Sierra, J. L., Coz Díaz, J. J. d., & Martinez-Martinez, J. E. (2020). A new methodology to design sustainable archimedean screw turbines as green energy generators. International Journal of Environmental Research and Public Health, 17(24), 9236.
  3. (2018). Archimedes screw turbine as an energy conversion device for a run-of-river micro-hydropower plant. 3rd International Conference on Power and Energy Engineering, December 03-04, Rome, Italy
  4. Betancour, J., Velásquez, L., Jaramillo, L., Chica, E., & Rubio-Clemente, A. (2021). Application of a central composite face-centered design in the optimization of an archimedean hydrokinetic turbine. Energy Power Qual J, 19, 418-422.
  5. Bouvant, M., Betancour, J., Velásquez, L., Rubio-Clemente, A., & Chica, E. (2021). Design optimization of an Archimedes screw turbine for hydrokinetic applications using the response surface methodology. Renewable Energy, 172, 941-954.
  6. Dedić-Jandrek, H., & Nižetić, S. (2019). Small scale archimedes hydro power plant test station: Design and experimental investigation. Journal of cleaner production, 231, 756-771.
  7. Dellinger, G., Simmons, S., Lubitz, W. D., Garambois, P.-A., & Dellinger, N. (2019). Effect of slope and number of blades on Archimedes screw generator power output. Renewable Energy, 136, 896-908.
  8. Durrani, A. M., Mujahid, O., & Uzair, M. (2019). Micro hydro power plant using sewage water of Hayatabad Peshawar. 15th International Conference on Emerging Technologies (ICET), IEEE.
  9. Edirisinghe, D. S., Yang, H.-S., Kim, M.-S., Kim, B.-H., Gunawardane, S. P., & Lee, Y.-H. (2021). Computational flow analysis on a real scale run-of-river archimedes screw turbine with a high incline angle. Energies, 14(11), 3307.
  10. Erinofiardi, E., Syaiful, M., & Prayitno, A. (2015). Electric power generation from low head simple turbine for remote area power supply. Journal Teknologi, 74(5).
  11. Koetsier, T., & Blauwendraat, H. (2004). The Archimedean screw-pump: A note on its invention and the development of the theory. International Symposium on History of Machines and Mechanisms: Proceedings HMM2004, Springer.
  12. Laghari, J., Mokhlis, H., Bakar, A., & Mohammad, H. (2013). A comprehensive overview of new designs in the hydraulic, electrical equipments and controllers of mini hydro power plants making it cost effective technology. Renewable and sustainable Energy reviews, 20, 279-293.
  13. Lashofer, A., Kaltenberger, F., & Kaltenberger, F. (2013). Does the Archimedean Screw Turbine Stand the Test? Wasserkraftprojekte: Ausgewählte Beiträge aus der Fachzeitschrift WasserWirtschaft, 310-318.
  14. Lee, M. D., & San Lee, P. (2021). Modelling the energy extraction from low-velocity stream water by small scale Archimedes screw turbine. Journal of King Saud University-Engineering Sciences, 35(5), 319-326.
  15. Rohmer, J., Knittel, D., Sturtzer, G., Flieller, D., & Renaud, J. (2016). Modeling and experimental results of an Archimedes screw turbine. Renewable energy, 94, 136-146.
  16. Rorres, C. (2000). The turn of the screw: Optimal design of an Archimedes screw. Journal of hydraulic engineering, 126(1), 72-80.
  17. Shahverdi, K. (2021). Modeling for prediction of design parameters for micro-hydro Archimedean screw turbines. Sustainable Energy Technologies and Assessments, 47, 101554.
  18. Shahverdi, K., Loni, R., Maestre, J., & Najafi, G. (2021). CFD numerical simulation of Archimedes screw turbine with power output analysis. Ocean Engineering, 231, 108718.
  19. Simmons, S., Songin, K., & Lubitz, W. (2017). Experimental investigation of the factors affecting Archimedes screw generator power output. HYDRO, 20-17.
  20. Simmons, S. C., & Lubitz, W. D. (2021). Archimedes screw generators for sustainable micro‐hydropower production. International Journal of Energy Research, 45(12), 17480-17501.
  21. Straalsund, J. L., Harding, S. F., Nuernbergk, D. M., & Rorres, C. (2018). Experimental evaluation of advanced Archimedes hydrodynamic screw geometries. Journal of Hydraulic Engineering, 144(8), 04018052.
  22. Syam, I., Maulana, M. I., & Syuhada, A. (2019). Design and performance of archimedes single screw turbine as micro hydro power plant with flow rate debit variations (case study in air dingin, samadua-south aceh). Journal Inotera, 4(1), 13-22.
  23. Ubando, A. T., Marfori, I. A. V., Peradilla, M. S., Sy, C. L., Calapatia, A. M. A., & Chen, W.-H. (2022). Sustainable Manufacturability of Archimedes Screw Turbines: A Critical Review. Journal of Manufacturing and Materials Processing, 6(6), 161.
  24. Waters, S., & Aggidis, G. A. (2015). Over 2000 years in review: Revival of the Archimedes Screw from Pump to Turbine. Renewable and Sustainable Energy Reviews, 51, 497-505.
  25. YoosefDoost, A., & Lubitz, W. D. (2020). Archimedes screw turbines: A sustainable development solution for green and renewable energy generation-A review of potential and design procedures. Sustainability 12(18), 7352.
مدیریت آب و آبیاری
دوره 14، شماره 2
مهر 1403
صفحه 329-342

فایل ها

هم رسانی

ارجاع به این مقاله

آمار