@article { author = {sadeghi, sonia and samani, jamal and samani, hossein}, title = {Evaluation of the complicated and rational method of storm sewer networks design using simulation-optimization approach}, journal = {Water and Irrigation Management}, volume = {12}, number = {2}, pages = {405-424}, year = {2022}, publisher = {University of Tehran, College of Aburaihan}, issn = {2251-6298}, eissn = {2382-9931}, doi = {10.22059/jwim.2022.335811.951}, abstract = {In this study, optimal designs with minimum costs are obtained for various storm return periods. Then the risk analysis is used to determine the return period in which the design cost plus the damage risk cost is minimum. SWMM software was used to handle the simulation and the Network optimization was performed by using the genetic algorithm. The non-linear reservoir model to convert the rainfall into runoff and the dynamic wave model to perform the network hydraulic simulation in this software are utilized as a complicated simulation model. The results showed that the 10-year return-period storm in which the summation of the design and the damage risk costs are minimum is the one that should be selected. Also, the rational method of the software was applied as the simplest method of rainfall-runoff and the hydraulic calculations were performed using a Manning equation without considering the flow travel time. The results show that the return period of the risk analysis is the same as the first one whereas the total design costs are greater by 16 percent. Afterward, the classical rational method in which the flow travel time is considered was used to design the same network. The peak flows of the pipes were remarkably reduced, causing the design costs to be only 5 percent greater than the complicated precise method. It can be concluded that the simple classic rational method considering the flow travel time may be used in the design of storm sewer networks due to its acceptable accuracy and costs.}, keywords = {Complicated Method,Genetic Algorithm,Rational Method,SWMM model}, title_fa = {ارزیابی روش پیچیده و استدلالی طراحی شبکه دفع آب‌‌های سطحی با استفاده از شبیه‌‌سازی- بهینه‌‌سازی}, abstract_fa = {طراحی سیستم مرتبط با سیلاب، با ریسک همراه است و لذا طرحی بهینه است که هر دو جنبه هزینه اجرا و خسارت احتمالی در آینده را مدنظر قرار دهد. انتخاب دوره بازگشت بارش-رواناب در این پژوهش براساس تحلیل ریسک صورت گرفته است. در این روش دوره بازگشتی انتخاب می‌شود که در آن مجموع هزینه‌های طرح و ریسک خسارت حداقل است. نرم‌افزار SWMM برای شبیه‌سازی هیدرولوژیکی- هیدرولیکی شبکه استفاده شد. بهینه‌سازی شبکه با استفاده از الگوریتم ژنتیک انجام شد. در مدل SWMM برای تبدیل بارش به رواناب از مدل مخزن غیرخطی و برای روندیابی آن از مدل موج دینامیک به‌عنوان دقیق‌‌ترین روش شبیه‌‌سازی استفاده شد. مدل تهیه‌شده در محله‌ای از تهران به‌‌کار برده شد و طرح بهینه با دوره بازگشت 10 سال به‌‌دست آمد. هم‌چنین برای حل همین مسأله روش استدلالی همین نرم‌افزار به‌‌عنوان ساده‌ترین روش محاسبه بارش-رواناب به‌کاربرده شد و محاسبات هیدرولیکی بدون درنظرگرفتن زمان انتقال در مجاری و استفاده از معادله مانینگ انجام شد. نتایج روش اخیر نشان داد که دوره بازگشت طراحی با روش اول یکسان بوده و جمع هزینه‌های طراحی 16درصد بیش‌تر است. سپس از روش کلاسیک استدلالی برای طراحی استفاده شد. با به‌‌کاربردن روش کلاسیک استدلالی که در آن زمان انتقال در مجاری در نظر گرفته می‌شود، دبی‌‌های پیک برای هر لوله کاهش یافت و در نهایت هزینه‌های طراحی با مقایسه با دقیق‌‌ترین روش 5 درصد بالاتر بوده است؛ بنابراین از این روش بسیار ساده می‌توان برای طراحی استفاده نمود.}, keywords_fa = {Complicated Method,Genetic Algorithm,Rational Method,SWMM model}, url = {https://jwim.ut.ac.ir/article_87572.html}, eprint = {https://jwim.ut.ac.ir/article_87572_a392c45af62c00c93c0cd300b5874160.pdf} }